FPV Drone Fiber Relase Box
Part 1: Fiber Optic Data and Video Transmission Module/Sky Terminal
Optical Data Video Transmission Module - Ground Terminal
Power Supply Type: 5V Power Bank (Type-C)
Shell Material: PLA
Product Specifications: 64mm×45mm×21mm
Body Weight: 37g+0.5g
Fiber Optic Module Interface and Parameter Fiber Optic Interface:: FC Fiber Type: Single Mode - Single Fiber Data Rate: 0~1Mbps Single-mode wavelength: 1310(9/125um)+15500 Transmission Distance: 0~20km |  |
Data Interface: SH1.0*6PINSH1.06PIN (SH1.06PIN),Type-C，3.5mmTRRS Video Format: NTSC/PAL Data Direction: Bidirectional Data Format:TTL(TTL) |  |  |  |
Part 2: Fiber Optic Drum Specifications
5-10km Fiber Optic Distribution Box 5-10km Dimensions: 12cm (Diameter) * 32cm Shell Material: Acrylonitrile-Butadiene-Styrene Copolymer(ABS) Fiber Specification: 0.27mm Weight: 0.96kg( for 10km ) | 10km Fiber Optic Distribution Box Dimensions: 12cm (Diameter) * 3 2 cm Shell Material: Acrylonitrile-Butadiene-Styrene Copolymer (ABS) Fiber Specification: 0.27mm Weight: 1.5kg (for 15km ) 1.9kg (for 20km ) 2.7kg( for 30km) |
Preparation before using the fiber optic reel
1. Ensure that the FC module is aligned with the pigtail and the black tape on the tail is removed to facilitate signal transmission. | 2. Operate slowly, exposing the heat shrink tube and transparent optical fiber to avoid transmission impact. |
3. Cut off the fixed cable ties and pull them out completely so that the internal fiber can move freely | 4. Remove all obstacles, take off slowly, and ensure that the optical fiber coil is working properly. |
3. Device connection Procedure
| Connect the device to the receiver and wireless image transmission using a 3.5mm cable from the AV_OUT to the display or wired display glasses. |  |
