Precautions for the use of fiber jumpers and pigtails
The fiber optic patch cord and pigtail are avoided as much as possible during use, which can effectively reduce the attenuation of the optical signal during transmission.
The optical module patch cord and fiber pigtail connected optical modules must transmit and receive the same wavelength. Generally, the multimode fiber patch cord/pigtail is matched with the short-wave optical module, and the single-mode fiber patch cord/pigtail is combined with the long-wave optical module to ensure data. The accuracy of the transmission.
The connector of the fiber patch cord and pigtail should be kept clean. After use, apply the protective cover to seal the connector to avoid oil and dust. If it is stained, use a cotton swab to pick up the alcohol.
The pigtail is relatively slender with respect to the fiber jumper and is not resistant to high temperatures. The pigtail cannot be used in a high temperature environment exceeding 100 °C.
