Description:
SURJED3 provide 6 fiber cable in-out round ports for the diameter Ф7-Ф18mm optical cable in and out. It is used for splicing and protecting optical cables.
This product is made of ABS and sealed by silicon rubber and mechanical sealing structure filled with the sealing material. The external component and fastening piece are all made of the high-quality iron. It can be opened after sealing.
Application:
Aerial -hanger, Wall-mounting, Pole mounted
Specification:
Dimension / Weight
| Φ170.5*441mm / 1.8Kg
|
Cable diameter
| Ф7-Ф18mm
|
Cable entry ports
| 3 in & 3 out
|
Max. splice tray / Max. Capacity
| 5 (12core/tray, 24core/tray duplex) / 120core
|
Cable port sealing structure
| Slealing rubber & Nut lock
|
Closure sealing struture
| Mechanical sealing
|
Water proof grade
| IP67
|
Packing size(cm) / Weight
| 62*47*41(6PCS) / 17Kg(6PCS)
|
Components:
Splice protector sleeve(60mm)
Sticky cincture:1 pc
Sealing washer(rubber):1 pc
Plug for cable port (rubber):6 pcs
Hanging hook:1 set
Instruction Manual
1.Across the cable through the cable port, plug and Pedestal, then strip cable as the requirement of installation.
| 
2.Fix the strength wire.
|
3.Fix and lock the cable and cable strength wire.
| 
4.Screw the nut tightening by wrench.If the cable too small, can put in some wateproof tape then screw.
|
5.Fix the rest fibers on the splice tray by the nylon ties.
| 
6.Put one protect sleeve on the fiber and then fix the spliced fiber on the splice tray，and test it.
|
7.Put on the splice tray cover.
| 
8.Put on closure housing and then screw up the hold hoop,press down the housing and base.
|
9.Fix on the hanging hook.
| 
10.Finished
|
