Description:
SURJED7 fiber optical splice closure has 6pcs or 5pcs cable port for cable entry. It is made of high quality ABS. The closure and the foundation plate are sealed with Silicon Gum Material which fixes tightly by hoop. And the sealing of cables use Shrinkable tube. The closure can be opened and used again, no need to change the sealing material after sealed.
Application: Aerial-hanged, pole-mounting, wall mounted
Specification:
Dimension | φ239.98 x 501.5 mm |
Weight | 3.8 kg |
Max. Cable diameter | Φ23 mm |
Cable Entry & Exit | 6 round port or 1 oval + 4 round port |
Max. capacity of splice tray | 24 fibers |
Max. qty of splice tray | 6pcs |
Max. capacity of cores | 144 fibers |
Sealing structure | Heat shrinkable sealing |
Accessories:
1.Transparent Bare fiber protect tube
2.Cable tie
3.Sealing Heat shrinkable tube
4.Heat shrinkable protection sleeve
5.Mounting hoop
6.Insulating tape
Main electrical technical parameters
Protection grounding device:
Insulation resistance: ≥2×104MΩ/500V（DC）
Withstanding Voltage: ≥15000V（DC）/1min, no breakdown, no flash over.
Main mechanical performance parameters
Extrude: Withstand ＞600N Axial tension
Squash: Withstand pressure 1500N/100mm
Shock: Withstand 16N·m, 3 times
Bending: The closure and connection between closure cover & base can withstand bending tension 150N, bending angel ±45°, 10 cycles.
The basic structure and dimensions
SURJED7 has 6 round ports or 1 oval port + 4 round port (see below picture)
Working principle:
1—fiber cable 2—splicing connection 3—fiber cable
Structure:
1--base 2--cable fixing board 3—cable storage tray 4—fiber splice tray 5—sealing ring 6—closure body 7--hook
Features:
Aerial, pole mounted, wall-mounted, duct installation.
Plastic parts are made of high-quality anti-aging plastic, metal parts are made of high-quality rust-proof materials.
Easy installation for closure sealing & cable entry/exit sealing.
Reasonable design for fiber bending radius, enough fiber storage space.
Big storage space for fiber splice tray, rotary angel more than 90°, easy for installation & maintainance.
Can install grounding device and valve.
Long service life of up to 25 year.
IP standard: IP68
Environment:
Operating temperature: -40℃～＋65℃
Storage temperature: －25℃～＋65℃
Relative humidity: ≤85%（＋30℃）
Atmospheric pressure: 70～106kPa
Installation & adjustment:
1. Check the closue & accessories are in good condition.
2. Prepare the installation tool
3. Installation
CV007 dome type fiber optic splice closure can be aerial and pole-mounted installation.
Aerial mounted
Fix the hook on the closue body, then hang the other side of hook on steel wire. (See below picture)
1--closure 2—aerial hook 3—steel wire
Pole mounted
Fix the pole mounted plate on closure, then install the “U” screw bolt on pole. (See below picture)
1—pole mounted fixing plate 2—plate 3—“U” screw bolt 4—steel wire
Using & operation:
1. Please read the instruction.
2. Open the anchor ear, then open the closure.
3. Make sure the length of cable that fixing inside. (See below picture)
A—Length of fixing cable when entry closure B—Length of cable
C—Length of cable inside closure D—Length of lead out fiber
4. Strip the cable jacket, the length can be checked as your using condition or as per above picture.
5. Open the cable entry port by saw blade. (See below picture)
6. Cable installation
Put the stripped cable go through the heat sleeve and entry cable port. (See below picture)
Fix the strengthen core on closure and use clamp fixing cable (see the picture)
Arrange the fiber entry splice tray and do splicing. (See the picture)
7. Install fiber optic splitter & optical adapter
CV007 dome type fiber optic closure can install 2pcs steel tube PLC splitters.
Working principle(see below picture)
1—optical cable 2—splicing connection 3—fiber pigtail 4—Optical adapter
5—PLC splitter(steel tube type) 6—splicing connection 7—optical cable
The location of fiber optic splitter & optical adapter (See the picture).
8. Shrinkable tube sealing
Remark on cable, then use sandpaper polish the location that will be packed by shrinkable tube.
(See the picture)
Heat shrink sealing
Twine the aluminum foid on cable, then put heat shrink tube; heating the tube, then finish the sealing. (See the picture)
If entry/exit two cables, using fan out kit beteen two cables, then heating the shrink tube, finish sealing.
9. Check sealing & request.
1.The cable should be fixed by tie while entry splice tray.
2.The cover of splice tray should be closed.
3.Check the screws are fixed tightly.
4.Sealing accessories are in good condition.
5.The heat shrink tubes are fixed tightly.
10. Installation cover
1.Put the closue body together with closue base.
2.Install the hook, then fix tightly the body and base by screws.
Accessories:
Item | Name | Specification | Unit | Quantity |
1 | Heat protect sleeve | L=60mm | PCS | As per capacity |
2 | Cable tie | L=100 | PCS | 10 |
3 | Heat shrink tube | Φ30*150mm, black color | PCS | 6 |
4 | Protect tube for bare fiber | Outside diameter 3mm | Meter | 1 |
5 | Insulating tape | Black color | roll | 1 |
Optional accessories:
Item | Name | Qty | Remark |
1 | Pole mounted accessories | 1 | For pole mounted application |
2 | Aerial mounted accessories | 1 | For aerial using |
3 | Valve | 1 | For testing |
