Four corners pressurized fiber end face grinding machine -SUR-550ST

Product description

Manufacturer statement：Because of products may be updated，Grinding machine series product manuals listed products may be related to different objects,Please in kind prevail，The company reserves the right not to inform customer first modify specifications.  

Practical problems encountered, in accordance with the specification can't solve please relate this company after-sales service personnel.

Matters need attention :

1.Not far away from the machine in use to prevent moisture infiltration,cause damage to the

Machine

2.Don't make the grinding machine after being hit by a undue vibration and unnecessary

3.Don't use wet hand to touch a button or switch operation

4.Should guarantee the grinding mechanical and electrical source using the correct voltage and frequency

5.Not to touch the rotating parts of use

6.When disassembling grinding chassis and other components, should ensure that cut off power supply

NO.01 -Product Introduction

1.  It can undertake 24 grinding head at the same time ,so it’s very suitable for mass production
2. Grinding process using LCD displays，it can simultaneous display Time Speed and Counter，Make the process easier to control quality
3. Grinding fixture using four pressure, is determined by the amount of pressure into the elastic cushion the grinding pressure, simple operation, product processing and high precision and good consistency.

4. It can produce mail in accordance with IEC standard geometric end face
5. Using planetary trajectory grinding way
6. Using the new I.P.C fixture (each insert core can be pressurized independently) technology makes the qualification rate of industrial production is more high, and Ken whether grinding head or 24 connection, grinding, high operating flexibility

7.MU and LC connector maximum grinding 24, SC, FC, ST connector up to 20

8. Use high quality heat treatment of stainless steel, make the machine keep the accuracy and the use of very high

NO.02 -External structure

The control panel of buttons and functions

1. The power switch for turning the starting button

2. set the < > the SEC setup starting key

3. The number plate "S0 - the integrated" can set the length of the grinding TIME

4. Start the < ON > start grinding

5. Stop < OFF > grinding

6. Press the clear key < CLER > for abrasive disk reset number

7. SPEED switch for SPEED regulating start key

8. Rotational SPEED control knob < SPEED COUNTROL UNIT > can adjust the SPEED of grinding

NO.03 -Set the application method

1. Open the panel power switch and start switch

2. Click on the < > the SEC milling time digital display screen flashing, continuous press numeric keys to set milling time (see chart). Click the Settings < > the SEC milling time digital display screen is not flashing milling time setting is completed.

3. Click ON < ON > start grinding

4. Click ON < OFF > end mill

NO.04-Air pressure adjustment method

1.Back out the “pressure retaining screw” all around   

2.By means of screw “press bolt” to adjust the air pressure，back out the screw to decreases the pressure，screw down the screw to increases the pressure

3.When adjustment finished ,screw down the “pressure retaining screw”

NO.05-Grinding machine maintenance

 In order to keep grinding machine normal working state, in the after each use of the machine, should undertake the following maintenance procedures

1. Every time after completion of grinding, grinding or want to stop for a period of time, the machine all residue should be clean.

2. Dust cleaning pressure within the column

3. Each month a grinding disc playing once a week lubricating oil (grinding bottom bar loaded object to resist up become warped, can tear open grinding disc lubricating oil)

4. Such as long time do not use the machine, total power of mill should be closed, sealing preservation      

NO.06-Machine common faults and the reason

NO.07-Technology main parameters

Machine size ： 　     L×W×H =220×280×310（mm）
Work environment ：      The temperature  10℃～40℃；

Relative humidity ：　     5%～85%
The noise sound ：         no-load  < 50db
Vibration dynamic ：　   Working    0.25g　5～100Hz　  10min 

                                        Stopped 　0.50g 5～100Hz  10min
Acceptable impact ：      50 mm high drop（Single touch the ground）
Electricity ：　 　           220～230VAC　50Hz/60Hz
POWER：                      115W
Transfer speed：            0～110r/min

Storage condition

Environment temperature：　-40℃～85℃
Relative humidity ：　　　   15%～85%
Vibration dynamic：　　　   1.0g 5～100Hz 45min

Warm prompt: This equipment with our ground fixture use

more efficient, stable and energy!