What are the advantages of MTP/MPO fiber patch cords?

The advantages of applying MPO/MTP fiber optic cables in data center are as follows:

1. Protecting the effectiveness and safety of investment, although the application of MPO/MTP cable provides high requirements for the integrator's early and actual site survey capabilities, it can also fully protect the investor's control over the project and the right to use the product to avoid Material waste and risk of project investment.

2. Economically applicable, overall, the MPO/MTP pre-end approach does not add additional costs.

3. Easy to operate, easy to install, save installation time, and plug and play. We can make a simple comparison, such as laying a 288-core fiber optic cable, 3 construction workers, 2 sets of equipment, using traditional fusion fiber method, laying about 2 hours, and the time required for the fusion fiber plus installation is about 8 Hours, a total of about 10 hours, and if the MPO/MTP pre-cast cable is used, the laying time is still 2 hours, but the installation time is greatly reduced, only about 45 minutes, which undoubtedly has a huge advantage in time cost.

4. The MPO/MTP pre-cast cable is fully tested in the factory, and no additional products are added during the installation process. The field test operation is simple.

5. The fiber link protection is sufficient, no solder joints and bare fibers are exposed to the air, and there are no problems such as aging and joint breakage.

6. Easy to maintain and safe, the mechanical performance of the MPO/MTP prefabricated fiber optic cable splitter is excellent, and maintenance or operation will not affect the normal use of the fiber.

7. Reinstallable and mobile, the MPO/MTP pre-fiber cable splitter can be quickly plugged and unloaded and reinstalled as needed.